Hello All,
Can anyone help me out with a picture or a diagram of which wires goes where on an ittock? I'm looking to re solder the internal wires to the plug end. Thanks for your help.

Cheers,

JIm

L (Left) = white
LG (Left Ground) = blue
R (Right) = red
RG (Right Ground) = green

Looking at the din socket, up into the arm, there are 5 pins if you numbered the pins starting from the lower left and going round clockwise it would be as follows;-
1-red Right signal
2-Green Right ground
3- arm ground black if its in a linn TT it should have a short lead for the ground in the turntable and a long one to go to your Phono stage
4-White Left signal
5- Blue Left ground
check with a multimeter from head shell to plug and plug to phono stage

>3.
2 . .4
1 . .5

Alan

Hi Alan,

Thank you for your response. It was very helpful.

Cheers,

Jim