I/C REL Stentor Sub Woofer

[LesW]

In Rosenut and due in next week.

Some details:

Used as supplement to your main speakers and set up properly, the REL Stentor will blend seamlessly with almost any speaker and will improve not only your systems' bass response, but it will improve your system in areas you may not have previously associated with subwoofers!

STENTOR

Reference class sub-bass system designed for use with very high quality stereo and multi-channel audio systems in larger rooms.

True 300W (continuous) discrete, direct-coupled MOSFET amplifier
Downward-firing long-throw 250mm (10”) very heavy duty “Volt” driver, die-cast chassis
Refined ABC® variable crossover adjustment in 24 musically correct semi-tone increments between 24Hz-106Hz.
Acoustic Resistive Matrix (ARM) loading for smoother bass response
Four position mode selector: line/LFE (0 degrees phase and 180 degrees phase)
Audiophile grade toroidal transformer
Gas-tight Neutrik high level connection for long-term consistency of sound quality
High quality, panel-mounted twin phono inputs at 0dB and +12dB (low level)
High and low level balanced inputs (Neutrik/XLR)
Totally discrete input circuitry for high and low level inputs
Separate volume controls for high and low-level adjustment
Simultaneous connection of high and low level sources
Set-Safe® audibly transparent driver protection
Balanced-bridge power supply
8x ultra-rugged output devices
Double thickness, double-sided glass-fibre board with plated-through holes
IEC power input socket - no captive leads for installation flexibility
Hand-built in Great Britain, three year worldwide warranty

Specifications:

System Type
ARM loaded cabinet with ABC® semi-tone variable bass filter. 70 litre.

Lower Frequency response
In room -6dB: 11Hz
Amplifier Input impedance High level 100 kohm

Gain Control Range
Low level 10 kohm
80dB

Drive unit impedance
8 ohm

Mains input voltage
115 V 50/60 Hz or 230 V 50/60 Hz, subject to country

Dimensions WxHxD mm (inches)
incl. feet and rear panel controls
650x580x450 (25.61 x 22.85 x17.73)

Weight Kg (lbs)
55 (121.25)

The price will be right I assure you.

Interested parties should register their interest by PM our through my site:

www.avondaleaudio.com

[LesW]

http://www.ebay.co.uk/itm/REL-Stento...item20c5122514

Thanks, Les